Printer Buyers Guide
Roland Print and Cut
Patches
Spangle Elite
Digital Heat FX
Triton
ColDesi Graphics

TRANSGLOSS INSTRUCTIONS

FOR CREATING A GLOSSY FINISH….
ON OUR DIGITAL TRANSFERS (InkJet or Laser Transfers)

After printing your transfer on one of our heat transfer papers….
(ie: Transfer Jet, PremiumPlus, or High Temp Laser) You will apply this TransGloss product to the pre-printed transfer after the printed transfer is on the shirt.

NOTES:
1) YOU DO NOT PRINT ON THIS TRANsGLOSS PRODUCT!
2) A conventional home iron will not provide a satisfactory image transfer. You must use a heat press.

First follow the directions that come with the digital heat transfer paper (ie: TransferJet, PremiumPlus, or High Temp
Laser) that you are going to print on. Then follow the rest of the below instructions:

Applying TransGloss:
(After applying your printed transfer to the shirt)

  • Place TransGloss paper (gloss side facing down) on top of the printed transfer.
  • Set heat press to medium pressure (approx. 40 Ibs. of pressure). Press should snap closed firmly.
  • Transfer at 360°F for 5-8 seconds.
  • Peel COLD!

Washing

  • Turn garment inside out. Machine wash in warm or cold water.
  • Do not use softener or bleach.
  • Tumble dry on low setting. Do not dry clean!
  • To brighten image on fabric after washing, press with an iron or heat press on medium setting. Make sure
    you cover image with Teflon sheet to protect iron/heat press.

IMPORTANT: Please keep your Transgloss paper in plastic bag until actual use. This will keep moisture out of the paper. Close the bag after each use. Note: Gloss finish may wear after repeat washing. See above wash instructions.

Call Today 800-891-1094 or Contact Support Service!