CleansRite Head Maintenance Solution (HMS) 500mL

Instructions for Use:

For Light Nozzle Clogs: Using a large foam swab, apply HMS onto the bottom surface of the print head, by gently wiping in one direction. Fill capping station top with HMS and park the head over the capping station. After 45 minutes, perform an automated clean on your printer system and perform a nozzle check to confirm. If there are still some drop nozzles but it has significantly improved, repeat the process.

For Heavier Nozzle Clogs: After performing the above steps, if there are still a high percentage of nozzles clogged, fill the capping station top with HMS, park the head and power off your printer. Let it sit overnight. The next morning, perform a simple clean on the system and print a nozzle check to confirm.

Download SDS Documentation