DTG Light Garment PreTreat - 1 Liter

Before Use: Always SHAKE the container before using or pouring into your pretreatment machine container.

Application: Apply evenly, preferably with a Pretreatment machine. However a HVLP spray gun will work well.

If you are printing a 14x14 inch print you will want 15g minimum to get good results.

How do you test that?   

• Weigh blank shirt
  
• Use cardboard to make a 14x14 square 
  
• Spray in square only
  
• Weigh shirt again. 
  
• It should be 15-18 grams…. If you go as high as 25 grams, you can get even better results.
  

IMPORTANT: There are many shirt options, styles and colors. Some will perform differently than others. Always test your pretreat method and print before doing full production.

Other tips:

Heavier Garment = More Pretreat

Darker Color = More Pretreat

Better shirts = Better prints. Tight weaves and smooth finishes

Shelf Life: 6 months

Pre-Printing Cure:

Temp:  330F

Time:  30 seconds. (if still moist, add a little more time)

Pressure: Light pressure, increase as needed for different garments

Storage of Garments:

Pre-pretreated shirts can be done ahead of time, two weeks is a max recommended storage. Press the garment for 5-10 seconds before printing if stored more than 24 hours.