The Compress UV Adhesion Promoter XP
A 'stronger-bond' adhesion promoter for
difficult to print plastics & metals, glass, rubber, carbon fiber, ceramics
and other challenging surfaces. Prepare your surface by cleaning with ISO or
acetone then hand apply adhesion promoter by foam brush or lint free cloth and
allow to dry (takes approximately 1-2 minutes to dry) and you are ready to
Polymers, Metal, Glass
Which Adhesion Promoter should you use?
Adhesion Promoter is our original promoter for use with plastic, glass and metal. It is a general “all around” promoter. Available in 250ml bottles or 500ml bottles.
The Adhesion Promoter XP is specifically used for other polymers (like carbon fiber for example.)
The determination of which promoter works best is a matter of trial and error since the print surface can be so varied. Start with standard Adhesion Promoter, if you do not get the desired results, try using Adhesion Promoter XP.
Of course, if you need any guidance be sure to contact your Compress UV Support Team by opening a ticket here.
Average Customer Review
Accepted Payment Methods:
Free Shipping & Ground Shipping available in USA only, not in AK or HI.