SubliClean Transparent Dye Sublimation Roll for Hard Surfaces

The iColor™ Dye Sublimation Upgrade Kit is just one of the many specialty cartridge sets that can be used in most iColor Transfer Media Printers. Instantly transform your iColor printer into a dye sublimation printer.

When pressing toner-based sublimation prints onto hard surfaces, polymer residue can transfer over to the substrate (especially when darker or denser graphics are used), which can have a dulling effect. It may therefore be necessary to either remove it once transferred or prevent the residue from transferring at all.

Preventing the polymer residue from transferring over to hard surfaces:

For most hard surfaces, the use of UNINET™ SubliClean film will prevent toner residue from transferring to the substrate during the pressing process. SubliClean is available in rolls, and is used in between the substrate and the printed transfer.

1. Unroll and cut a piece of SubliClean slightly larger than the size of the substrate.
2. Lay it flat on the substrate, then cover with the printed transfer sheet.
3. Press as stated in the instructions.
4. Subliclean should peel cleanly once it has cooled and solidified.
5. Discard after use, do not reuse.
6. Not for use on fabrics or garments. Only for use on hard surfaces!
7. The result will be a brighter, glossier image on your substrate.

Instead of SubliClean, the use of Sublimation Toner Hard Surface Cleaner will remove any toner residue that may have transferred.

• After the image has been pressed and peeled - pour a small amount of the solution onto the completed substrate and rub with a paper towel. The residue will come off rather easily.
• Once finished, be sure to wash off the cleaner from the substrate with soap and water before using.
• Not for use on fabrics or garments.
• The result will be a brighter, glossier image on your substrate.

Be sure to order SubliClean or a bottle of Sublimation Toner Hard Surface Cleaner with your Dye Sublimation kit if you plan to work with hard surfaces.