Colman And Company
Heat SEAL - 19" X 1 Yard
Add to Cart
Brand: Colman and Company    Part #: HeatSEAL-Yard
Heat SEAL - 19" X 1 Yard
    Brand: Colman and Company     Part #: HeatSEAL-Yard

    Heat SEAL - 19" X 1 Yard

    Price as low as
    HeatSEAL will be your answer for smaller runs of patches, emblems, and badges. This film will be attached to the backside of a finished embroidered image. 

    It's recommended to accompany our 'Patch-Mat' material, giving you the ability to cutout the patch with a hot knife. All edges will be nicely sealed. The finished edge will not look quite like a patch that has gone through a 'merrowing' machine, but will stay together and be the best you can produce in smaller quantities from start to finish. 
    HeatSEAL can then give the end-user the choice to iron-on or heat-press the patch to the garment(textile) or become a 'sewn-on' patch. A hook-n-loop type attachment is also a viable choice. 

    Comes as a roll, 19" wide by 10 yards long. Also available in a one-yard sheets and a 100 yard roll. 
    Product thickness: 7mil 

    To bond HeatSEAL to back of emblem/patch material: 
    330-350 degrees / 40-50 psi / 10 seconds press time / flip and press again 

    To bond patch to garment: 
    330-350 degrees / 60-80 psi / 10-15 seconds press time on the front-side / flip and press from the back-side 20-25 seconds 

    Extra information 
    - The HeatSEAL glue product has two somewhat discernible sides, but there is no difference from one side to the other. This is simply a flat sheet of heat-activated glue. 
    - Please do not use on Leather. There are natural 'oils' in leather than will loosen the HeatSEAL material, resulting in a failure to bond. 
    - You can use a clothing hand-iron if you need to. Set the iron to the setting just above 'Wool'.


    Average Customer Review