Heat Press LOWER PLATEN COVER 16X20

The LOWER PLATEN COVER - 16" X 20" can assist you in keeping the lower rubber-covered platen free from the sticky stuff. Can work alone or in tandem with the Nomex Heat Pad - 1/2" X 16" X 20" product.

This product can compliment the Nomex Heat Pad by keeping hold of the thick pad and aids in the ability to work with uneven surfaces or varying depths of apparel decorations.

This product wraps the base of your 16X20 heat press to protect it. Due to the nature of how the product is constructed, loose corners are not uncommon. It will not affect the overall performance of the Teflon wrap. The wrap is not intended for placing on top of your garment before pressing, but is designed to stay on the base of your press.

Understand, it can be a bit wrinkled and this could present an issue. DTG and Vinyl users should be aware that any wrinkle in the wrap can translate to the actual design on the garment. A flat, loose Teflon sheet may work best for the DTG/Vinyl user.  

The wrap was designed for a 16X20 heat press, not for any specific brand of press.