|
*General Heating Instructions for Design Transfers*
Protective TEFLON sheet required for heat press and hand iron:
A Nomex Heat Pad (Part #RMN-1/2NOM1620) is highly recommended, placed under your garment.
Heat Press > set at 340-350 degrees / Dwell Time 10-15 seconds / PSI 40-50
A piece of teflon or parchment paper could be placed inside garment to stop glue transference.
PreHeat garment BEFORE placing stones/studs onto fabric.
Heat press stones/studs for 10-15 seconds - flip over and repress.
A third pressing from the front will seal the embellishments even better, but twice is usually sufficient.
Wait until image cools, cover top-side of pressed design with a teflon sheet and RUB design with cloth.
Peel off transfer paper. Viola!
Hand Iron > Highest setting / 40-45 seconds / Keep still / No Steam!
Embellishment Heat Tool > Follow tool instructions
Good idea is to press with heat press or hand iron after placing all of the individual stones/studs
|
SS12/3.5mm Products
Return to Top
|
|
